494
American Made
206 Nance Rd. NE. Calhoun, Ga. 30701
Phone: (888) 685-0025 Fax: (888) 781-5255
DESCRIPTION:
CASA 494 is a post-formable, non-flammable, water-based adhesive for bonding plastic
laminate. It can also be used to bond FRP panels and metal to particle board, gypsum
board, plywood, metal and certain other materials.
ADVANTAGES:
• Non-Toxic with no Solvents
• Excellent Temperature Resistance
• Zero VOC
• Economical–Up to 800 Sq. Ft. per Gallon
• One Part Adhesive with Short Dry Time
• Dyed Blue for Enhanced Visibility
APPLICATION:
Surfaces must be clean and dry. Spray an even coat of adhesive (approximately 4 to 5 grams per
square foot) on both surfaces. Allow both to dry completely before bonding. When dry, adhesive
will not transfer to fingers when touched. Drying time will be 8-15 minutes, depending upon atmospheric conditions such as temperature and humidity, as well as the amount of adhesive applied.
Do not exceed 8 hours open time. Place both surfaces to be bonded in exact position desired.
CASA 494 bonds immediately and cannot be repositioned. Post-forming temperatures
should be set at 400º to 450º F, while allowing normal cycle times using Evans or equivalent
equipment. Clean up wet adhesive with CASA Quick Clean #6.
PACKAGING:
• 5 Gallon Pails • 55 Gallon Fiber Drums • 275 Gallon Disposable Totes
SHELF LIFE:
One Year from the date of manufacture in unopened container.
CASA 494
POST FORMING-WATER-BASED
CONTACT ADHESIVE
CASA ADHESIVE, INC.
CASA Adhesive, Inc.
For A Cleaner Environment
